1 mounting the z-module, 2 mounting the y-module, Mounting the z-module – Eppendorf TransferMan4 r User Manual
Page 28: Mounting the y-module
Advertising
28
Installation
TransferMan
®
4r
English (EN)
4.4.1
Mounting the Z-module
Prerequisites
• 3 mm Allen torque key
4.4.2
Mounting the Y-module
Prerequisites
• 3 mm Allen torque key
1. Push the Z-module holder onto the
microscope adapter and tighten.
2. Push the fixed rail onto the Z-module
holder until it reaches the stop angle and
tighten the screw.
The connecting cable faces to the rear.
Advertising