Eppendorf TransferMan4 m User Manual
Transferman
Advertising
Table of contents
Document Outline
- TransferMan® 4m
- Table of contents
- 1 Operating instructions
- 2 Product description
- 3 Safety
- 4 Installation
- 4.1 Preparing installation
- 4.2 Selecting the location
- 4.3 Mounting overview
- 4.4 Mounting the motor module
- 4.5 Inserting the capillary holder into the angle head
- 4.6 Inserting the capillary into the capillary holder
- 4.7 Setting the injection angle
- 4.8 Aligning the motor module
- 4.9 Entering mounting parameters
- 4.10 Converting the swivel joint for left side mounting
- 4.11 Converting the angle head for left side mounting
- 4.12 Connect the motor module to the control board
- 4.13 Setting installation parameters
- 5 Software
- 6 Operation
- 6.1 Switching the device on or off
- 6.2 Activating or deactivating the control board
- 6.3 Defining the start screen
- 6.4 Replacing the capillary
- 6.5 Changing the sample
- 6.6 Changing the size of the working range
- 6.7 Shifting the movement range of the capillary
- 6.8 Capillary positions
- 6.9 Vertical limits
- 6.10 Horizontal limit
- 6.11 Speed function
- 6.12 Step injection function
- 6.13 Home function
- 6.14 Clean function
- 6.15 PiezoXpert function
- 6.16 Installation function
- 6.17 Function function
- 6.18 Softkeys function
- 6.19 Change appl. function
- 6.20 Service function
- 6.21 Resetting parameters to the factory settings
- 7 Troubleshooting
- 8 Maintenance
- 9 Technical data
- 10 Transport, storage and disposal
- 11 Ordering Information
- Index
- EC Conformity Declaration
- Evaluate your manual