Eppendorf FemtoJet - Manual (Page 8)

6
2 Device description
2.1 Overview
1 Display
– Displays relevant parameters during injection or setting
of parameters.
– Guides operator through functions.
2 Keypad
– To trigger actions.
– To call up the function menu.
– To switch to and from Standby mode.
3 Variable regulators
– To set parameters injection pressure p
i
, injection time t
i
and
compensation pressure p
c
.
– To select functions and parameters in Function mode.
4 Tube connection
– To connect the injection tube to the device via the bayonet joint.
1
2
3
4
02_Geraetebeschreib_en.fm Seite 6 Mittwoch, 27. September 2006 5:12 17