Eppendorf Mastercycler pro User Manual
Page 65
Advertising
System management
Mastercycler pro
English (EN)
65
Make the settings in the header(see Editing header settings on p. 42).
Press the
OK
function key.
The editor is displayed.
Press the
>>
function key and then
Save
.
You can start the program without renewed optimization of the parameters.
Setting from the Mastercycler 533x
program
Corresponding setting in the program header
LID 105 °C
Lidtemp 105 °C
Wait
TSP/ESP heated lid
AUTO
Switch off lid at low block temperature
CNTRL
BLOCK =
Temp. mode block
TUBE =
Temp. mode safe
or
fast
Block temperature control behavior
Activate the
Simulate Mastercycler gradient
checkbox
Advertising