Eppendorf ThermoMixer FP - Manual (Page 18)

Eppendorf ThermoMixer F1.5/FP — Operating manual
18
5.4 Mixing
5.4.1 Mixing without temperature control
1. In order to switch off the temperature control, press the temp off key.
2. Set the mixing frequency by means of the speed arrow keys.
3. In order to start the mixing process, press the start/stop key.
•
The symbol flashes on the display.
4. In order to end the mixing process, press the start/stop key.
•
The display shows the last used parameters.
5.4.2 Mixing and tempering
1. Set the temperature with the temp arrow keys.
The device immediately starts to perform the temperature control.
2. Set the mixing frequency with the speed arrow keys.
3. In order to start the mixing process, press the start/stop key.
•
The symbol flashes on the display.
•
The display shows the actual temperature/set temperature and the mixing frequency.
4. In order to end the mixing process, press the start/stop key.
•
The display shows the last used parameters.
•
Temperature control is continued.
5.4.3 Short Mix
Use the Short Mix function for mixing for a short while without temperature control.
1. Set the mixing frequency by means of the speed arrow keys.
2. Keep the short key pressed.
The mixing process continues as long as the short key will be pressed.
3. In order to end Short Mix, release the short key.
Hint!
You can select the mixing frequency between 300 rpm and 1 500 rpm
(ThermoMixer F1.5) or 2 000 rpm (ThermoMixer FP). The mixing frequency can be
adjusted in steps of 50 rpm.
EN
Operating manual