Best ISER222 SERIES User Manual

Iser222 series range hoods, Specification sheet

Advertising
background image

SPECIFICATION SHEET

BEST BY BROAN

P.O. BOX 140 HARTFORD, WISCONSIN 53027

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted by

Date

ISER222 SERIES
RANGE HOODS

Mount range hood so bottom of hood is

24” minimum above cooking surface.

70D

99042854E

Tubular, wrap-around utensil rail serves as both a
stunning accent and a practical addition to this
elegant angular design.

FEATURES

Italian design

Island mount

Finishes: 304 Stainless Steel #4 Brushed, White, Black,
Polished Brass, Brushed Copper

Utensil rail is chrome when ordering stainless steel finish,
brass rail with all other finishes

Size: 70cm x 122cm (27-9/16” x 48”)

Telescopic flue accommodates 8’ to 9’ ceilings

8” round duct connector/backdraft damper

Halogen lighting (4 x 20 watt, Type JC 12V 20W G4 Base
- bulbs included) with two-level lighting provides bright
cooktop illumination and a low nighttime setting

Advanced, multispeed electronic push-button controls
with individual speed indicators

Quiet variable speed centrifugal blower with high efficiency
motor produces 1000 CFM of exhaust

Delay timer control automatically shuts off range hood after
ten minutes

Special control indicates when it’s time to clean the filter

Dishwasher-safe filter features a quick-release latch and
decorative cover plate

Heat Sentry

TM

- automatically turns blower to high speed

when excess cooking heat is detected

OPTIONS

Flue extension for 10’ ceiling (Model FEXTISER222)

Replacement grease filters available

Replacement bulb (Part No. SB02300891)

Exterior blower version available (IEX222)

SPECIFICATIONS

VOLTS

AMPS

CFM

SONES

DUCT

120

6.26

1000

10.0

8” round

HVI-2100 CERTIFIED RATINGS comply

with new testing technologies and

procedures prescribed by the Home

Ventilating Institute, for off-the-shelf

products, as they are available to

consumers. Product performance is rated

at 0.1 in. static pressure, based on tests

conducted in AMCA’s state-of-the-art test

laboratory. Sones are a measure of

humanly-perceived loudness, based on

laboratory measurements.

Advertising