JLG 1100SJP Operator Manual - Manual (Page 45)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121255 – JLG Lift – 3-13
NOTE: The Jib Swing function is not operable when the Capacity
Select control is in the 1000 lb. (450 kg) position.
10. Jib Swing (1100SJP Only)
This switch allows the operator to rotate the jib to the left
or right.
11. Axle Extend/Retract
This switch allows the operator to extend or retract the
axles. The axles can only be extended or retracted while
the machine is being driven forward or reverse.
12. Soft Touch Indicator (If Equipped)(1100S Only)
Indicates a Soft Touch switch is against an object. All
controls are cut out until the override button is pushed,
at which time controls are active in the Creep Mode.
13. Platform Rotate
This switch allows the operator to rotate the basket to
the left or right.
14. Jib Stow Override (1100SJP Only)
This switch allows the operator to rotate the jib to the
right past the electronic stop to stow the jib under the
boom for transport.
15. Function Speed Control
Controls the speed of Boom and Swing Functions.
Rotate CCW for slower speed and CW for faster speed.
To adjust to creep, turn knob fully CCW until it clicks.