JLG 34HA Parts Manual - Manual (Page 15)

3120804 1-7
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
.
FIGURE 1-2. FRAME, STEERING & DRIVE COMPONENTS, ASSEMBLIES & INSTALLATIONS -
FIXED & OSCILLATING AXLES (OPTIONAL 2WD - SINGLE ACTING STEER CYLINDER)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
FRAME WELDMENT OPTIONS: Ref.
2360283 Frame Weldment (1.75m With Oscillating Axle & Standard
Platform) 1
2360288 Frame Weldment (1.75m With Fixed Axle & Standard Plat-
form) 1
2360321 Frame Weldment (1.75m With Oscillating Axle & Low Mount
Platform) 1
2360322 Frame Weldment (1.75m With Fixed Axle & Low Mount
Platform) 1
2360330 Frame Weldment (2m With 12 x 16.5 Tire Option & Oscillat-
ing Axle) 1
0251475 Frame Weldment (2m With 12 x 16.5 Tire Option & Fixed
Axle) 1
AXLE INSTALLATION OPTIONS: Ref.
0251326 Oscillating Axle - 1.75m MACHINES (Optional - When
Equipped) Ref.

0251486 Oscillating Axle - 2m MACHINES (Optional - When
Equipped) Ref. B
0251487 Fixed Axle - 2m MACHINES (12” x 16.5” Tires) Ref. A
1 Axle Options: 1
4843094 1.75m Machines
4843728 2m Machines
2 1682406 Lockout Cylinder Assembly - Oscillating Axle Only (See
Section 5 for Breakdown) 2
3 Hardware Options: 1
4300034 Stud (Welded on Part) (1.75m Machines Only)
0641610 Bolt 3/8”-16NC x 1 1/4” (2m Machines Only)
4 Hardware Options: 1
4751600 Flatwasher 3/8” (1.75m Machines Only)
4740185 Flatwasher 3/8” (Hardened) (2m Machines Only)
5 4761600 Lockwasher 3/8” 1
6 Top Weldment, Pin Options: 2
4842622 1.75m Machines
4842794 2m Machines
7 2160002 Fitting, Grease 1
8 4842621 Weldment, Pin 1
9 0641406 Bolt 1/4”-20NC x 3/4” (Oscillating Axle Only) 4
10 4761400 Lockwasher 1/4” (Oscillating Axle Only) 4
11 Bottom Weldment, Pin Options: (Oscillating Axle Only) 2
4842794 1.75m Machines
4843286 2m Machines
12 3311601 Nut 3/8”-16NC (1.75m Machines Only) 1
13 Not Used
14 4751400 Flatwasher 1/4” (Oscillating Axle Only) 4