Inserting batteries – Brother P-TOUCH PT-1700 User Manual
Page 9
-7-
The machine uses six “AA” size (AM3, LR6, SUM-3, R6) batteries.
To insert batteries:
(1) Turn the machine over. Remove the battery compartment cover by pinching
the latch and lifting.
(2) Follow the diagrams on the back of the compartment to insert the batteries in
the proper direction.
(3) After inserting the batteries, re-fit the battery compartment cover.
When “BATT” (Batteries Weak) is displayed, replace the six batteries.
●
Alkaline batteries are recommended.
●
An optional AC Adaptor is available. (Model AD-30:7V, 1.2A)
●
When replacing batteries, do so in three minutes or less. Otherwise,
unless an optional AC Adaptor is attached, any message in the work-
ing area or Phrase Memory will be lost.
●
Note the following details when 1.2 V rechargeable NiCd batteries
are used in this machine.
(1) “BATT” will not appear on the display when the rechargeable
batteries are weak or empty. Instead, the power will turn off.
(2) Even after the batteries are recharged, the characters may not be
printed clearly as a result of a low recharging efficiency or the
operating conditions.
INSERTING BATTERIES
Note: