JLG 450A_AJ Series II Operator Manual - Manual (Page 34)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-10 – JLG Lift – 3121289
9. Tie Rod Ends and Steering Spindles - See Inspection
Note.
10. Turntable Bearing - Evidence of proper lubrication. No
evidence of loose bolts or looseness between bearing and
machine.
11. Swing Motor and Worm Gear - Evidence of proper lubri-
cation; No evidence of damage.
12. Auxiliary Hydraulic Pump - See Inspection Note.
13. Main Hydraulic Pump - See Inspection Note.
14. Platform Rotator - See Inspection Note.
15. Fuel Tank - See Inspection Note.
16. Hydraulic Reservoir - See Inspection Note.
Figure 2-5. Daily Walk-Around Inspection - Sheet 3 of 3