JLG 1250AJP Parts Manual - Manual (Page 165)

3121172 1250AJP 2-107
SECTION 2 TURNTABLE
FIGURE 2-23. 7500W SKYPOWER GENERATOR INSTALLATION - CATERPILLAR MACHINES
(OPTIONAL)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. 7500W SKYPOWER GENERATOR INSTALLATION
1001117508 Ref. 60Hz Spec D
1001121889 Ref. 50Hz Spec B
Ref. Note: SkyPower Generator is Standard On ANSI & CSA
Specs. Optional on All Other Specs.
Ref. Note: See Section 7 for Boom Cable Installation.
1 0100011 A/R Compound, Locking
2 0100019 A/R Compound, Locking
3 0100020 A/R Sealant, Pipe (Not Shown)
4 0100048 A/R Grease, Dielectric
5 0641404 A/R Bolt 1/4”-20NC x 1/2”
6 0641508 4 Bolt 5/16”-18NC x 1”
7 0641516 3 Bolt, 5/16-18NC x 2”
8 to 9 Not Used
10 0641618 1 Bolt 3/8”-16NC x 2 1/4”
11 0641810 2 Bolt 1/2”-13NC x 1 1/4”
12 to 14 Not Used
15 2 Box, Switch-Weatherhead Options:
0860038 60Hz Spec
Not Available 50Hz Spec (Supply Locally)
16 A/R Box, Generator Control Options:
0861538 1 60Hz Spec
0861572 1 50Hz Spec
7024488 1 Card, Circuit - Generator Power (Not Shown)
Not Available 1 Fuse (Purchase Locally)
7024489 1 Card, Circuit - Control (Not Shown)
Ref. Note: Same Circuit Card (P/N 7024489) is used for both
60Hz & 50Hz. When replacing card, rocker switch on
card must be set for required application.
70000619 1 Harness, Circuit Card
17 1 Junction Box Assembly Options (See Items 101-128 for
Breakdown):
0861542 1 60Hz Spec
0861567 1 50Hz Spec
18 0902888 1 Bracket, Generator Junction Box
19 0962520 1 Bushing, Taper
20 2820031 A/R Insulator, Heat Shrink
21 3251102 1 Nameplate, Generator
22 3311508 3 Nut, 5/16”-18NC Serrated Flange
23 Not Used
24 3311801 2 Nut, 1/2”-13NC
25 to 26 Not Used
27 1 Pulley, Belt Tensioner Options:
3580317 Prior to S/N 0300149098
1001129733 S/N 0300149098 to Present
28 1 Pulley, Generator Options:
3580318 1 60Hz Spec
3580319 1 50Hz Spec