JLG 3246ES Parts Manual - Manual (Page 71)

3121275 1930ES, 2030ES, 2630ES, 2646ES & 3246ES 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM INSTALLATIONS
Ref All Specs Except CE & Japanese Specs
0274817 Ref 1930ES (Original Equipment) E
1001134933 Ref 1930ES (Service Replacement) A
0274991 Ref 2030ES/2630ES C
0274930 Ref 2646ES/3246ES B
Ref CE & Japanese Specs Only
0275029 Ref 1930ES F
0274992 Ref 2030ES/2630ES C
0274931 Ref 2646ES/3246ES B
Ref Note: All versions are available on ANSI Export & Australian
Specs.
1 1 Platform Assembly (See Items 101-113 for Breakdown):
Use 1001134934 1930ES (Service Replacement) (Original Equipment was p/n
0274818)
0274971 2030ES/2630ES
0274929 2646ES/3246ES
2 AR Block, Slide Options:
3340976 2 1930ES (Front Block)
3340965 2 1930ES (Rear Block)
1001134951 2 1930ES (Spacer Sleeve Used with Rear Block) (Service
Replacement Platforms Only)
0561520 4 2030ES/2630ES/2646ES/3246ES
3 3900351 4 Bolt M10 x 30mm
4 AR Bolt M10 Options:
0701022 2 70mm Length (Front Slide Block - 1930ES)
0701027 2 100mm Length (Rear Slide Block - 1930ES) (was p/n
0701026 - 90mm Length)
0701029 2 120mm Length (Rear Slide Block - 1930ES) (Service
Replacement Platform Only)
0701024 2 80mm Length (Front Slide Block - 2030ES/2630ES/2646ES/
3246ES)
0701027 2 100mm Length (Rear Slide Block - 2030ES/2630ES/2646ES/
3246ES)
5 Not Used
6 3291005 8 Locknut M10
7 4 Pin Options:
3423049 All Machines except CE & Japanese Specs
See Note CE & Japanese Spec Machines
(Note: Refer to JLG Supplement p/n 3124288)
8 3574067 2 Plate, Extension Stop
9 4812000 4 Flatwasher M10