Selecting an application mode, Switching input signal, Hiding the image – BenQ MP620 User Manual
Page 35
Operation
29
Selecting an application mode
The projector is preset with several predefined
application modes so that you can choose one to suit
your operating environment and input source picture
type. To select a operation mode that suits your need,
press Mode. The picture modes available for different
types of signals are shown below. See
for details.
Switching input signal
The projector can be connected to multiple devices
at the same time. However, it can only display one at
a time. To cycle through the available input sources,
press the Source button on the projector control
panel or the remote control. The selected source
name will display at the center of the screen for 3
seconds after each button press.
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly moving
images (movies).
The input type effects the options available for the Application Mode. See
for details.
Hiding the image
In order to draw the audience’s full attention to the
presenter, you can use Blank to hide the screen image.
Press any key on the control panel to restore the
image. The word “BLANK” appears at the bottom
right corner of the screen while the image is hidden.
When this function is activated with an audio input
connected, the audio can still be heard.
You can set the blank time in the
Advance
--> Blank Time
menu to let the projector return the
image automatically after a period of time when there
is no action taken on the blank screen.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
PC Signal Input
Brightest Presentation
(default)
sRGB/Photo
Gaming
Video
YPbPr / S-Video / Video Signal Input
Movie (default)
Cinema
Gaming
Photo