JLG 9MP Service Manual - Manual (Page 12)

SECTION 1 - MACHINE SPECIFICATIONS
1-4 – JLG Lift – 3121163
1.7 CYLINDER SPECIFICATIONS
NOTE: All dimensions are given in inches (in), with the met-
ric equivalent, centimeters (cm), given in parenthe-
ses.
1.8 SERIAL NUMBER LOCATIONS
For machine identification, a serial number plate is affixed
to the machine. The plate is located on the back of the
mast, just above the mast support column.
Table 1-4. Cylinder Specifications
DESCRIPTION
BORE
in./(cm)
STROKE
in./(cm)
ROD DIA.
in./(cm)
9MP
Lift Cylinder
1.63
(4.10)
47.50
(120.65)
1.375
(3.49)