JLG 450A_AJ Series II Parts Manual - Manual (Page 19)

3121243 450A & 450AJ Series II 1-11
SECTION 1 FRAME
FIGURE 1-3. AXLE AND STEERING INSTALLATION - 4WD
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref FIXED AXLE INSTALLATION
0270969 Ref Prior to SN 0300107512 E
0274703 Ref SN 0300107512 to SN 0300124000 A
Ref Note: USA Manufacture Only.
1 0100011 AR Compound, Locking
2 AR Bar, Stop Options:
0362763 2 Prior to SN 0300107512 3/8in Bar
0362763 4 SN 0300107512 to SN 0300124000 3/8in Bar
0362764 2 SN 0300107512 to SN 0300124000 1/8in Bar
3 2 Bolt 3/8in-16NC x 7/8in
0641607 Prior to SN 0300069841
See Note SN 0300069841 to SN 0300124000 (See FRAME SHIELDS
INSTALLATION for call out)
4 2 Bolt Options:
0641620 Bolt 3/8in-16NC x 2-1/4in
0641616 Bolt 3/8in-16NC x 2in
5 0642012 1 Bolt 5/8in-11NC x 1-1/2in
6 0961950 2 Bushing, Garmax
7 3422592 1 Pin, Axle Pivot
8 2 Plate, Stop Options:
3570901 Prior to SN 0300107512
4220267 SN 0300107512 to SN 0300124000
9 3841258 1 Keeper, Pin
10 1 Shield, Frame Options:
4061020 Prior to SN 0300069841
See Note SN 0300069841 to SN 0300124000 (See FRAME SHIELDS
INSTALLATION for call out)
11 AR Shim Options:
4070974 Prior to SN 0300107512
4070973 SN 0300107512 to SN 0300124000
12 4740158 1 Thrustwasher
13 4751600 2 Flatwasher 3/8in Regular
14 1 Axle Weldment Options:
4846353 1 Prior to SN 0300107512 Axle Weldment
Note: If kingpin holes in the axle measure 1.503in
diameter or larger in any direction, axle weldment must
be replaced.
Note: See Kit Item 250 & additional notes at end of parts
list before ordering parts.
0280199 1 SN 0300107512 Axle Weldment
14A 0561300 2 Steer Cylinder Mounting Block Assembly
15 2220235 3 Fitting, O-Ring (Not Shown)