JLG 860SJ Operator Manual - Manual (Page 122)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-30 – JLG Lift – 3121630
6.7 PROPANE FUEL SYSTEM PRESSURE RELIEF
THE PROPANE FUEL SYSTEM OPERATES AT PRESSURES UP TO 312 PSI (21.5 BAR). TO
MINIMIZE THE RISK OF FIRE AND PERSONAL INJURY, RELIEVE THE PROPANE FUEL
SYSTEM PRESSURE (WHERE APPLICABLE) BEFORE SERVICING THE PROPANE FUEL
SYSTEM COMPONENTS.
To relieve propane fuel system pressure:
1. Close the manual shut-off valve on the propane fuel tank.
2. Start and run the vehicle until the engine stalls.
3. Turn the ignition switch OFF.
RESIDUAL VAPOR PRESSURE WILL BE PRESENT IN THE FUEL SYSTEM. ENSURE THE
WORK AREA IS WELL VENTILATED BEFORE DISCONNECTING ANY FUEL LINE.
1. Electric Lock Off Solenoid
2. Housing Seal
3. Filter Magnet
4. Filter Housing
5. Electrical Connector
6. Fuel Outlet
7. O-ring
8. Filter
9. Fuel Inlet
10. Ring
Figure 6-8. Filter Lock Assembly