JLG 860SJ Operator Manual - Manual (Page 55)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121630 – JLG Lift – 3-15
14. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is against
an object. All controls are cut out until the
override button is pushed, at which time controls are active
in the Creep Mode.
15. Platform Rotate
Provides rotation of the platform when posi-
tioned to the right or left.
NOTE: MAIN LIFT, SWING, and DRIVE control levers are spring-loaded
and will automatically return to neutral (OFF) position when
released.
16. Function Speed Control
This control affects the speed of telescope
and platform rotate. Turning the knob all
the way counterclockwise until it clicks puts
drive, main lift and swing into creep mode.
NOTE: To operate the Main Boom Lift/Swing joystick,
pull up on the locking ring below the handle.
NOTE: The Main Boom Lift/Swing joystick is spring
loaded and will automatically return to neutral
(off) position when released.
17. Main Lift/Swing Controller
Provides main lift and swing. Push
forward to lift up, pull backward
to boom down. Move right to
swing right, move left to swing
left. Moving the joystick activates
switches to provide the functions
selected.
NOTE: Main boom lift and swing functions may be selected in combi-
nation. Maximum speed is reduced when multiple functions are
selected.