Machine inspection, 3 operation, General – JLG 860SJ Operator Manual User Manual

Page 13: Machine inspection -3, Operation -3, General -3, 3 operation general

Advertising
background image

SECTION 1 - SAFETY PRECAUTIONS

3121630

– JLG Lift –

1-3

Machine Inspection

• Do not operate this machine until the inspections and func-

tional checks as specified in Section 2 of this manual have
been performed.

• Do not operate this machine until it has been serviced and

maintained according to the maintenance and inspection
requirements as specified in the machine’s Service and Main-
tenance Manual.

• Ensure all safety devices are operating properly. Modification

of these devices is a safety violation.

MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE MADE
ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.

• Do not operate any machine on which the safety or instruction

placards or decals are missing or illegible.

• Check the machine for modifications to original components.

Ensure that any modifications have been approved by JLG.

• Avoid accumulation of debris on platform floor. Keep mud, oil,

grease, and other slippery substances from footwear and plat-
form floor.

1.3

OPERATION

General

• Machine operation requires your full attention. Bring the

machine to a full stop before using any device, i.e. cell phones,
two-way radios, etc. that will distract your attention from
safely operating the machine.

• Do not use the machine for any purpose other than position-

ing personnel, their tools, and equipment.

• Before operation, the user must be familiar with the machine

capabilities and operating characteristics of all functions.

• Never operate a malfunctioning machine. If a malfunction

occurs, shut down the machine. Remove the unit from service
and notify the proper authorities.

• Do not remove, modify, or disable any safety devices.

• Never slam a control switch or lever through neutral to an

opposite direction. Always return switch to neutral and stop
before moving the switch to the next function. Operate con-
trols with slow and even pressure.

• Do not allow personnel to tamper with or operate the

machine from the ground with personnel in the platform,
except in an emergency.

Advertising
This manual is related to the following products: