I.R.I.S. Readiris 14 for Windows User Guide - Manual (Page 136)

Readiris TM 14 – User Guide
143
H
OW TO
H
OW TO CONFIGURE YOUR SCANNER
In order to scan documents in Readiris, your scanner must be
configured correctly.
Before you configure the scanner in Readiris:
1. Make sure your scanner is connected to your computer, and
switched on.
Note: the scanner should be physically connected to your computer
with a USB cable. An ethernet or wireless connection may also be
used if the Twain driver supplied by the manufacturer has been
engineered with that capability.
2. Make sure you have the latest available Twain driver installed for
your scanner.
In general, drivers can be found on the website of your scanner
manufacturer. They are not provided by I.R.I.S. Note that some
scanner drivers may not work under the latest versions of Windows.
See the documentation supplied with your scanner to find out which
platforms are supported. If necessary, contact your scanner
manufacturer.