BOXLIGHT MP63e - Manual (Page 20)

20
Inserting the batteries
Loading AAA batteries into the remote control.
1. Remove the battery cover.
Push the knob while lifting up the battery cover.
2. Loading the batteries.
Make sure the plus and minus poles are correctly oriented.
3. Close the battery cover.
Caution
• Avoid excessive heat and humidity.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture, this
could result in malfunction.
• When the remote control will not be used for an extended period,
remove the batteries.
• Replace the batteries when the remote control becomse sluggish or unresponsive.
• Do not place the remote control close to the cooling fan of the projector.
• Do not disassemble the remote control. If the remote control needs service,
contact your dealer or Boxlight Technical Support.
Warning
The laser pointer function emits a class II laser beam. Do not look directly
into the laser beam outlet or point the laser beam at other people.
Vision can be impaired by shining the beam into the eyes.