Britax Roundabout - Manual (Page 20)

36 37
Care and Maintenance Care and Maintenance
Harness Buckle Removal
Fully recline the child seat.
Locate the metal buckle strap retainer
on the bottom of the child seat.
Pull the retainer away from child seat to
loosen.
Turn the retainer so the short side will
go through the slot in child seat shell
(Fig. A).
Push the retainer through slots in the shell and cover to the top
of the child seat.
Re-threading the Harness Buckle
Locate slot in cover and shell for harness buckle.
Turn the buckle retainer so the short side will go through the
slot in the cover and child seat shell Fig A.
Push the retainer through slots in the shell and cover, to the
bottom of the child seat.
Pull harness buckle away from child seat until tight and verify the
strap is not twisted and the release button is facing outward.
1
2
3
4
5
1
2
3
4
A
Cleaning the Harness Buckle
If a child eats and drinks while in the child seat,
the harness buckle may need to be periodically
checked and cleaned of any accumulated food,
drink, or other debris or dried liquids.
REMOVE BUCKLE as described on page 36.
THOROUGHLY RINSE using warm water
(Fig. A).
TEST THE HARNESS BUCKLE by fastening
and unfastening until a positive click is heard
after inserting each buckle tongue (Fig. B).
If either click is not heard, repeat cleaning
procedure.
TOWEL DRY
DO NOT lubricate, use solvents, abrasive cleaners, soap or other
household detergents.
•
•
•
•
•
A
x 2
B