I.R.I.S. IRIScan 2 for Windows - Manual

I.R.I.S. Getting Started – IRIScan Express/Executive PC – Iris Technical Support © 2009
IRIScan Express/Executive for Windows
Insert the CD and install items in the order presented with the first item being the actual scanner driver. On
Vista/Windows 7 disable the UAC prior to the install.
There are two ways to scan, either from within the program or using the button manager. Within Readiris/Cardiris
follow the steps below. In either program use these steps to setup the scanner in the programs.
1) Go to File > Select Source and choose IRIScan 3.0 Twain (32-32) – Older driver is: IRIScan 2.0 Twain 1.0 (32-32)
2) Go to Settings > Scanner > Scanner Model and choose IRIS IRIScan 2 (TWAIN)
3) Set the resolution and color options.
To use the button manager it should be resident in the tray on the task bar on the lower right next to the clock.
Right click on it and choose open. Go to the Button Right tab and select Readiris/Cardiris in the drop down. Select
the resolution and color to your liking and click OK. At that point you can insert a card in the scanner and press the
right button on the scanner itself and it should feed the card and send it directly to Readiris/Cardiris.
XP Vista Windows 7
The IRIS desktop search is optional
software that indexes the contents of your
hard drive to make searches for specific
information quicker and easier. There is no
need for this on Vista/Windows 7
The latest drivers can be found at the link below.
http://www.irislink.com/c2-1741-63/Drivers.aspx