I.R.I.S. IRIScan Pro 3 Cloud - Manual (Page 3)

English English
Using the Document Feeder
1. Open the document
feed tray.
2. Pull out the feed
extension plates at the
bottom.
3. Insert the
documents, top-down
and text facing the
scanner.
4. Align the document
guides with both edges
of the document.
Tip: make sure the front input tray remains closed when using the document feeder.
Using the Base Unit
1. Open the front input
tray.
2. Insert the document,
top facing scanner and
text facing down.
3. Center the document
using the paper size marks
on the tray.
Detaching the base unit from the document feeder
The base unit can be detached from the document feeder. That way it can be used as a convenient,
portable scanner.
1. Press and hold down the release button at the bottom right side of the scanner.
2. Tilt the base unit towards you, and then detach it from the feeder.
Step 6: Using the Button Manager (PC only)
To use the scanner buttons you need to configure the Button Manager.
1. Start the Button Manager from the
All Programs list.
2.The Button Manager appears in the bottom
right corner of the screen.
Make sure the scanner is powered ON.