I.R.I.S. IRISPen Express 6 for Mac - Manual (Page 37)

C HAPTER 5 - A DDITIONAL OPTIONS
33
encounters a vertical line during scanning, it executes a tabulation
in your target application. If your target application is a spreadsheet,
the <Tab> moves your cursor to the next cell and the various bits of
data are inserted in separate cells.
Various keyboard commands are proposed for the conversion, but
you will also be able to replace vertical lines by characters or any
combination of characters and commands.
Tip:
How to recompose a whole table?
If on top of the default <Tab> command, you add the line suffix <Home &
Down Arrow> (see: Basic parameters, Setting the text alignment), your
cursor will be relocated on the next row after each scanned line. By doing so,
you will be able to recompose a whole table.
To define the table frame conversion:
• Select Table Frame Conversion from the Settings menu, then
select the required keyboard command.
By default, the command <Tab> is selected.
Select User String to introduce your own table frame
conversion, then click OK to confirm. You can execute any
other keyboard command, add characters, or any combination of
all.