I.R.I.S. IRISPen Executive 6 for Mac - Manual (Page 33)

C HAPTER 4 - B ASIC PARAMETERS
29
• Indicate how the scanned area must be isolated and what the
output should be:
- keep all scanned characters
- keep all characters before the last space
- keep all characters after the first space
- keep all characters between the first and the last space
Ignore rejected characters in first and last position
If characters are not properly scanned or read at the beginning or
at the end of a line (these are by default represented by a tilde,
i.e. the "~" symbol), you can ignore them for the output. This
option is particularly useful when the word spacing is reduced or
when you scan text from columns (like in magazines, etc.): if
you start scanning slightly on the previous word/column and end
scanning on the next one, the unwanted parts can be deleted.
Select this option if you want to ignore the rejected characters at
the beginning and at the end of the scan. If characters are
rejected within the lines, these will be kept for the output.
Also see: Additional options, Unknown Symbol.
Restore paragraph
You must indicate how to interpret hyphens occurring at the end
of a line. If you scan the lines "The new presi-" and "dent waved
from the balcony", the hyphen must obviously be dropped so as