I.R.I.S. IRISCard Corporate 5 - Manual (Page 8)

English English
Scanner memory
The scaner has a built-in 512MB memory.
An SD card and standard USB flash drive can also be used to increase the storage capacity.
When storing images, the scanner uses the three possible memory types in the following
priority order:
USB flash drive > Memory card > Built-in memory
Light indicators
Refer to the table below to view the lighting patterns of the Power and Status indicators.
: Blinking green slowly : Steadily on green
: Steadily on yellow
: Off
: Blinking green rapidly
: Blinking yellow slowly
: Blinking yellow rapidly
Power Status Description
Scanning current original.
When the scanner is connected to a computer: the battery is fully
charged and the scanner is ready for use.
or
When the scanner is not connected to a computer: the scanner power
is on and the scanner is ready for use.
The scanner is powered off.
The baterry is fully charged (when scanner power is off and connected
to a computer).
Initializing system and memory devices.
Busy storing image file.
Reading/writing data in the scanner memory or storage devices.
Paper jam. Press the Power button.
Calibration error. Please refer to the complete User Guide.
Memory card full (free space below 1MB), card error, card locked or file
system not supported. Please use another card, delete some files from
the card, unlock the card or re-format the card to the FAT16 or FAT32 file
system.
The battery power is low.
The battery power is extremely low. Charge the battery immediately.
The battery is being charged when scanner power is off.
The battery is being charged when scanner power is on.