BURY CP 1000 CarPhone USER Manual User Manual
Page 13
13
13
Power supply
The power supply of the BURY CP 1100 is established via a 4-core cable. Connect the black (clamp 31 – minus), the
red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the power supply of your radio (where
required via the cigarette lighter or the fuse box). After connection to the counterpart, the yellow cable provides
for radio muting during a phone conversation. Please connect the white Molex connector with connection 1.
Attention:
Do not connect your device to the power supply or switch it on
X
until instructed to do so in the installation instructions.
Attention:
If you also connect the blue cable to clamp 30 (steady posi-
X
tive), the BURY CP 1100 will be permanently supplied with pow-
er. If the vehicle is not running for a longer period, this could
lead to a discharge of the car battery.
If you deviate from the specified connection descriptions it
X
may be the case that certain functions on the BURY CP 1100
(e.g. the on-call duty) will not function correctly.