IOGear GCS1808KITU - Manual (Page 57)

Note: If you did not check the “Check Firmware
Version” checkbox, utility will perform the upgrade
automatically no matter what version of firmware
you have in the KVM.
Step 8
Warning window may popup again for 2nd part of
the firmware upgrade (IO1).
Step 9
Then another warning window may popup for
3rd part of the firmware upgrade (IO2). (This is for
GCS1716 only)
56 57
Step 7
If you have checked the “Check Firmware Version”
checkbox, then the utility will check the current
firmware that is on your KVM. If the current
firmware is newer than the firmware that you wish
to upgrade to, a window will popup and prompt
you to ask if you wish to proceed. Simply click
“Yes” to start the upgrade and “No” to cancel the
upgrade.