Firmware upgrade – IOGear GWU627W6 User Manual
Page 41
Advertising
41
Firmware Upgrade
Step 1: Turn off your computer’s wireless
connection (if applicable) and disconnect the
Ethernet cable currently connect to your computer
(if applicable).
Step 2: Use both the included RJ-45 Ethernet cable
and the USB cable to connect the WiFi adapter with
your computer.
Step 3: Set your computer with a static IP address.
Step 4: Open your web browser and enter
192.168.1.252. This will bring up the configuration
utility. Click the
“Firmware Upgrade” button.
Advertising
This manual is related to the following products: