Chain lubricant, Cs-370 operation – Echo CS-370 Serial C08011001001 - C08011999999 User Manual

Page 19

Advertising
background image

CS-370

OPERATION

© 12/2013 ECHO Inc.

X7503251407

19

Mixing Instructions
1. Fill an approved fuel container with half of the required

amount of gasoline.

2. Add the proper amount of 2-stroke oil to gasoline.

3. Close container and shake to mix oil with gasoline.

4. Add remaining gasoline, close fuel container, and remix.

Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers
to reduce fuel spillage.

After use

• DO NOT store a unit with fuel in its tank. Leaks can occur.

Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area.
As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building,
away from sparks and flames.

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a
fuel stabilizer is added.

Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Chain Lubricant

Note: Cap indication - Fuel/oil tanks are indicated by the following illustrations

Proper lubrication of the chain while in operation reduces
friction between the chain and the guide bar to a minimum
and assures a longer service life.

• Use bar and chain oil of high quality for this purpose.

• Do not use used or reclaimed oil to avoid various oiler

problems.

• Use ECHO bar and chain oil.

• When ECHO bar and chain oil is not available: Use motor

oil, etc.

• Use bar and chain oil of the following grades:

• SAE No. 30....in summer

• SAE No. 10....in winter or when cutting resinous trees.

• When refueling, also refill chain oil.

For more information
scan this QR code.

Fuel tank cap

Oil tank cap

Advertising