Bell'O PR-25 - Manual (Page 5)

ASSEMBLY INSTRUCTIONS
NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. THIS TABLE IS
CONSTRUCTED WITH REAL WOOD VENEER. TO AVOID DAMAGE DURING ASSEMBLY, IT
SHOULD BE ASSEMBLED ON A SOFT SURFACE.
5
Fig. 1
1. PLACE the bottom shelf (F) on edge. PLACE four smaller dowels (3) into the holes in the top
side of the bottom shelf as shown in Fig. 1. PLACE the edge of one of the dividers (H) onto
the dowels, with the FRONT arrow facing the front of the shelf (the edge without the cut out
slots) as shown.
F
H
3