Operation, Chain lubricant – Echo CS-600P Serial C22312001001 - C22312999999 User Manual

Page 16

Advertising
background image

14

CS-600P

WARNING

• After choke control knob is pulled and then

knob is returned to original position, throttle
remains a little open (latch condition).

• If engine is started in this latch condition,

chain starts to turn. Do not start engine
before chain brake is activated.

CAUTION

• After starting the engine, immediately

squeeze and release throttle trigger for
disengaging throttle latch and returning
engine to idle, and pull front hand guard
towards the operator immediately.
(Chain brake unlocked position)

• Never use throttle latch for cutting.
• Use the chain brake only in starting or in

emergencies.

Oil tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation
reduces friction between the chain and the guide
bar to a minimum and assures a longer service life.

• Use bar and chain oil of high quality for this

purpose.

• Do not use used or reclaimed oil to avoid various

oiler problems.

• Use ECHO bar and chain oil.
• When ECHO bar and chain oil is not available:

Use motor oil, etc.

• Use bar and chain oil of the following grades:

SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting

resinous trees

• When refueling, also refill chain oil.

OPERATION

Start / Run

Ignition switch

Chain brake

Starter handle

Unlock chain brake

Throttle trigger

Fuel tank cap

Cap indication
Oil/fuel tanks are indicated by the following
illustrations on the caps.

Choke

Throttle trigger lockout

Decompression device

Advertising