Echo CS-271T C26312001001 - C26312999999 - Manual (Page 6)

4 CS-271T
SYMBOL FORM
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
Part Number X505-002310
Part Number X505-002062
WARNING
Chain brake must be unlocked before
removing or installing clutch cover. Improper
cover installation can result in serious injury
and cause severe damage to saw.
El freno de la cadena debe ser desbloqueado
antes de remover o de instalar la cubierta
del embrague. La instalación incorrecta de
la cubierta puede dar lugar a lesión seria y
causar daño severo a la sierra.
Part Number X505-006660
Part Number X524-004650
REPLACEMENT BAR AND CHAIN
GUIDE BAR CHAIN
PART NO. PART NO.
12” 12A4CD3745 90PX45CQ
12” 12A0CD3745 91PX45CQ
Note:
There may be other replacement
components for achieving kickback
protection. For details, please refer to
the chain and bar combination sheet
shown in the instruction manual.
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
WARNING!!
Read and follow all safety
precaution in the instruction
manual. Failure to follow
instructions could result in
serious personal injury.
Choke control “Cold Start”
position (choke closed)
Wear eyes, ears and head
protection Oil and gasoline mixture
Tip contact may cause the
guide bar to move suddenly
upward and backward, which
may cause serious injury
Chain oil fill
Contact of the guide bar tip
with any object should be
avoided Chain oiler adjustment
Both of the operator’s hands
must be used to operate the
chain saw Purge pump
Hot surface
L
Carburetor adjustment
- Low speed mixture
Chain brake operation
H
Carburetor adjustment
- High speed mixture
STOP
Emergency stop T Carburetor adjustment
- Idle speed