Echo LS21 Instruction v.1 - Manual

Instruction Sheet
4
6
2
5
3
1
Instructions
PN 77203-00
Rev. 012612
SUBJECT: FOUR-WAY WEDGE KIT
with STRIPPER PLATE (PN 77204-00)
FITS MODELS: LS21 & LS27
Before inspecting or servicing any part of this machine,
shut off or disconnect power source and make sure all
moving parts have come to a complete stop.
WARNING
KIT, 4 WAY WEDGE AND STRIPPER PLATE (77204-00)
ITEM PART # DESCRIPTION QTY.
1 15178 NUT 5/16 CENTERLOCK NC ZP 6
2 15250 WASHER, 5/16 FLAT ZP 6
3 15436
BOLT, 5/16 X 1-1/4 HEX HD GR5
NC ZP
6
4 77344-00 PLATE, LOG STRIPPER, SERVICE
PART (INCLUDES ITEMS 5 & 6)
1
5 18983-00 DECAL, CRUSHING ISO 1
6 36090-00 DECAL, CYLINDER OPERATION
(ISO)
1
STRIPPER PLATE INSTALLATION
To install the log stripper plate kit:
1. Remove the cradle cylinder channel.
2. Install the log stripper plate in the same holes with the
six 5/16 x 1-1/4" hex head bolts, flat washers and cen-
terlock nuts provided in the kit.
OPERATION
The log stripper plate will push the split logs off the wedge
as the wedge retracts.
Remove the existing cradle cylinder channel