Echo CH611DH Owners Manual v.5 - Manual (Page 15)

11 6 INCH CHIPPER
ENGLISH
Section
FeaTures & conTrols
3.1 conTrol panel
Diesel engine control panel
3 Starter
Switch
2 Fuel
Gauge
5 Water
Temp.
6 Oil
Pressure
7 Glow Plug
Controller
8 Charge
Lamp
9 RPM
4 Push
to Reset
1 Throttle
3
8 charGe lamp
The charge lamp will light up if the battery doesn't charge
correctly.
7 Glow pluG conTroller
When the key switch is turned to preheat position (to the
left) the glow plug controller will light up for several sec-
onds until the engine is ready to be started.
6 oil pressure GauGe
5 waTer TemperaTure GauGe
4 push To reseT
this button pops out during a power surge. Push it back
in to reset the system.
1 ThroTTle
The throttle controls the speed of the engine. To increase
throttle, turn the knob counterclockwise, to decrease, turn
it clockwise.
2 Fuel GauGe
3 sTarTer swiTch
Turn the key to the left to activate the glow plug. When
the glow plug light extinguishes, turn the key to the right to
start. DO NOT START THE MACHINE WITH THE CHIP-
PER ENgAgED.
9 rpm GauGe
understanding how your machine works will help you achieve the best results when using your machine. The following
descriptions define the features and controls of your machine.