Echo CH45342 Owners Manual v.3 - Manual (Page 26)

4.5 INCH CHIPPER 22
SERVICE & MAINTENANCE
BEFORE INSPECTINg OR SERVICINg ANy PART OF THIS MACHINE, SHuT OFF POWER SOuRCE,
DISCONNECT SPARk Plug WIRE FROM SPARk Plug AND MAkE SuRE All MOVINg PARTS HAVE COME TO A COMPlETE STOP.
WaRNING
Remove the chipper deflector and/or disk cover. 1.
Remove debris, taking care to avoid the chipper blades
which can be extremely sharp.
Once debris is removed, replace the chipper deflector
2.
and/or disk cover.
5.11 TRaILER SERvICE TIpS
5.12 CLEaRING a pLuGGEd dISk
5.13 LubRICaTIoN
Check wheel bolt torque monthly. 1.
Check air pressure in tires monthly. 2.
Check and repack wheel bearings with grease every 3.
12 months.
When towing, always connect the safety chains. Make
4.
sure trailer hitch bolts are tight.
Check trailer lights periodically.
5.
lubricate the machine periodically with a lithium-based
grease. Extreme working conditions will require more
frequent greasing.
grease the following points every 50-100 hours of
operating time:
ImpoRTaNT
Polyurea and lithium-based greases are not compatible.
Mixing the two grease types may lead to premature
failure.
NoTE
Do not over grease bearings. Overfilling can lead to
excessive heat and/or unseating of the seals. Add
grease slowly and under light pressure. Whenever
possible, rotate bearing slowly while lubricating.
.10 oz
(3 GRAMS)
.10 oz
(3 GRAMS)
Inside shield
Inside shield
Inside shield
.10 oz
(3 GRAMS)
Inside shield
.10 oz
(3 GRAMS)
pTo modELS