2 engine controls, English – Echo CH4400 Owners Manual v.2 User Manual

Page 15

Advertising
background image

4 INCH CHIPPER

11

ENGLISH

FEATURES & CONTROLS

1. Engine choke: Use when starting a cold engine. Push lever to ON position when starting. Push to OFF position

when engine is running.

2. Fuel cut-off switch: Push lever to the ON position to start and run engine.
3. Engine throttle: Changes engine speed. Push lever all the way to the ON position for full throttle operation. Push

the opposite way for engine idle. Push all the way to the OFF position to shut engine off. Refer to engine manual for

further engine operating instructions.

4. Starter cord: To start, pull the cord until light resistance is felt and then pull briskly.
5. Engine switch: Turn to ON position to start and run engine. To stop, turn to OFF position.
6. Fuel tank: Use unleaded gasoline with a pump octane rating of 86 or higher.

NOTE

For more detailed engine information, see the engine

owners manual provided with the chipper.

3.2 ENGINE CONTROLS

Low oil warning light

Advertising