Scarlett SC-1082 - Manual (Page 2)

2
DESCRIPTION
1. Carrying handle
2. Dust bag compartment
3. Air inlet
4. Built-in accessories compartment open
button
5. Dust bag full mechanical indicator
6. Built-in accessories compartment
7. Cord rewind button
8. Power control switch
9. Power light
10. On/Off button
11. Wheel
IMPORTANT SAFEGUARDS
When using this appliance, basic precautions should always be followed:
· Read this instruction manual carefully.
· Home use only. Do not use for industrial purposes.
· Before the first connecting of the appliance check that the voltage indicated on the rating
label corresponds the mains voltage in your home.
· Unplug the appliance from the power supply, when not in use and before servicing.
· To reduce the risk of electric shock, do not use outdoors or on wet surfaces.
· To avoid damage of the flexible hose, do not fold or pull it strongly.
· Do not leave the vacuum cleaner without supervision, when plugged in.
· Keep away from children.
· Never switch off the appliance by pulling the cord.
· To avoid deforming of the plastic components of the appliance or fire accident, never put
the appliance directly in sun shine or near any heater or the like.
· Do not handle the plug by wet hands.
· Do not put any object into inlets. Do not use with inlet blocked. Keep free of dust, hair and
anything that may reduce airflow.
· Be careful, when cleaning on stairs.
· Do not make attempts to repair the appliance, adjust or replace parts in the vacuum
cleaner. When malfunctions happen, contact the authorized service center for
examination, repair, electrical or mechanical adjustment.
· Do not let the cord hang over edges or touch hot surfaces.
· Before you start using the vacuum cleaner, please remove large or sharp objects from the
floor in order to prevent the damage of the filter.
CAUTION: Never use the vacuum cleaner without the filters.
VACUUM CLEANER ASSEMBLING
Always remove the plug from the power supply before fitting or removing accessories.
FITTING FLEXIBLE HOSE
· Insert the flexible hose into the air inlet and press it until it clicks into proper position.
HOSE REMOVING
· To remove the flexible hose from the vacuum cleaner, press the button situated on the
flexible hose base, then pull to remove it from the attachment point.
1
2
3
4
5
6 7
8
9 10
11