2n officeroute – 2N OfficeRoute - User Manual User Manual
Page 21
2N OfficeRoute
21
3.10.5
Telnet console access
This is a short description of new features added to the
serial console configuration. For the standard serial
console configuration capabilities refer to the 2N
OfficeRoute
There is also a possibility of using Telnet for 2N
OfficeRoute configuration in addition to the standard
serial
console
configuration.
Connect
to
your
OfficeRoute via Telnet (type telnet <your OfficeRoute
IP address> in command line). If successful,
OfficeRoute will require an authentization from you. To
log in, use valid login and password of one of
OfficeRoute’s users who is in Administrators group. No
user other than user from Administrators group will be
logged in. If login and password entered correctly, you
will be logged in.
Now you will see the window similar to the standard
serial console configuratoin window and you can work
with it in the same way. To log out Telnet
configuration, get to the main menu and choose Logout
option (this option is not visible in the serial console
window).
There are all menus available as by USB access.