2N Helios IP Vario - Manual (Page 53)

53
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
4.
3.2 Intercom Control as Viewed by External User
Quick Dialling Buttons
By pushing a quick dialling button on the basic unit you can call to positions 1, 3...6 of
the telephone directory (depending on the model type). With extending modules you
can use up to 54 quick dialling options.
By pushing a quick dialling button you call the telephone number assigned to the
selected telephone directory position. A call set-up is signalled by a long discontinuous
tone or any other tone as defined in the attached PBX configuration.
By re-pushing the same button during calling or setting up you can hang up, hang up
and call to another telephone number, or activate nothing as defined in the Intercom
Configuration / Hardware / Keyboard subsection of Configuration Manual.
You can also hang up the call any time by pushing if the button is Hang-up by #
enabled; refer to Intercom Configuration / Hardware / Keyboard subsection of
Configuration Manual.
Calling to Phone Book Position
The telephone directory may contain up to 1999 2N
®
Helios IP Vario
pre-programmed positions. You can use the quick dialling buttons for positions 1 to 54
only. To retrieve the remaining positions, use the numeric keypad if Dial Users by
is enabled; refer to the Phonebook Position Intercom Configuration / Hardware /
Keyboard subsection of Configuration Manual.
Procedure:
Enter the position number using the numeric keypad (e.g. 05, 15, 200, 1759 –
two digits at least and four digits at most) and push for confirmation.
You can also hang up the call any time by pushing if the Hang-up by #
button is enabled; refer to Intercom Configuration / Hardware / Keyboard
subsection of Configuration Manual.
Calling to User-Defined Telephone Number
If the (refer to the Telephone function enable Intercom Configuration / Hardware /
) is selected, you can call the user-defined Keyboard subsection of Configuration Manual
telephone number using the
numeric keypad. 2N
®
Helios IP Vario
Procedure:
Push .
You can hear the continuous tone from the loudspeaker.
Enter the telephone number using the numeric keypad and push again for
confirmation.
You can also hang up the call any time by pushing if the Hang-up by #
button is enabled; refer to the Intercom Configuration / Hardware / Keyboard