Basic settings – 2N VoiceBlue MAX v1.3 User Manual
Page 52
52
Restart the selected GSM modules to execute the changes.
After call relax delay – interval between the current call termination and next call
setup via the same GSM/UMTS module. 2 seconds is recommended for
high–traffic installations.
Disconnect call
Specify the reasons for an immediate disconnection of an outgoing GSM/UMTS call.
Send CLIP from VoIP to GSM/UMTS
Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – the CDN / CLIP separating character.
Modify (" removes one digit) – you can change the CLIP. The "– character is used
for deleting one char from the left.
GPRS activation
APN string – define the Access Point Name (APN) for GPRS connectivity.
Basic settings
Roaming enabled for network code – set the international network identifier for
roaming purposes consisting of the following two codes:
MCC – Mobile Country Code – country code (Czech Republic – 230);
MNC – Mobile Network Code – GSM code (T-Mobile – 01, 0202, Vodafone –
03).
Hence, the international identification code for T-Mobile CZ is 23001. Leave this field
empty to disable roaming.
String
Note
<empty>
Roaming is disabled
2300
Roaming is disabled (5 digits is the minimum count)
23002
Roaming is enabled for networks with MCC+MNC code 23002
230XX
Roaming is enabled for networks with MCC+MNC codes 23000 – 23099
XX001
Roaming is enabled for networks with MCC+MNC codes 00001 – 99001
XXXXX
Roaming is enabled for any network
Caution
The BTS lock service works with specific GSM modules only (Q55)!
An error in BTS identification results in a GSM module login failure.
Caution
The
service must be supported by the
Send CLIP from VoIP to GSM
GSM/UMTS provider. If not, the provider's network may reject the call!