A2Z Ozone AIR-7000 - Manual (Page 4)

4
OZONE IS AN EFFECTIVE PURIFIER
Ozone kills: bacteria, viruses, molds, mildew, spores, and cysts.
Ozone destroys: chemical contaminants such as aldehydes which can be emitted from paneling, carpets,
insulation, paints, stains, and plastics.
Ozone eliminates odors: cigarettes, cigars, pets, diapers, mildews, musty/ stale smells, airborne molds, food,
locker rooms, shoes and boots, and more!
OPERATION INSTRUCTIONS
1. Plug ozone generator into an AC outlet.
2.
Push Power button switch at bottom left side. LED light will become red.
3. Press Fan button, Fan turn on and LED light becomes green. Power LED also change from red to green.
4. Unit will automatically turn to the lowest setting.
5.
Adjust Fan speed before turning on Ozone. Fan has 3 settings, low, medium and high speed.
6. Push Ozone button next to Fan button.
7. Ozone LED light becomes green.
8. Unit automatically set the timer at 30 minutes. You may set it at 1, 2 or 4 hours.
9. Unit will turn off Ozone production after the designated run time.
Note:
A- Turn on Fan before you turn on Ozone. Ozone will not turn on before Fan.
B- Turn off ozone before you turn off fan.
C- Cool down the unit between each run. Heat will cause damage to this unit. This unit is not made for
more than 4 hours operation each time. Please cool down for at least 30 minutes before additional run.
Ozone Timer Setting Button
Fan Speed Button
Fan Power Button Ozone Power Button