ACE BACKSTAGE Mini Stage Pocket - Manual (Page 2)

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
#025BK #025BR #025CV
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com
2 of 4
“CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces,
depending on connectors selected. Connectors may be loaded into panels
with nutcerts and nut/bolts or black aluminum pop rivets.
ACE Mini Stage Pockets Connector Types:
• “Connectrix” Connectors (fits Neutrik ® /Switchcraft ® )
• Switchcraft ® Connectors
• Custom Panel Connectors (custom panel cutout required)
PANEL CAPACITY
ACE Mini Stage Pocket Panel Capacity:
• (2) #MP-100 Series “CONNECTRIX” Panels OR
• (2) #MP-200 Series Switchcraft ® Panels OR
• (2) Any combination of two Panels #MP-100 and/or MP-200 Series
“CONNECTRIX” SYSTEM PANEL DESCRIPTION
Many pre-cut stock #MP-100 Series “CONNECTRIX” System connector panels
and #MP-200 Series Switchcraft ® connector panels are available for the Mini
Stage Pocket. Standard “CONNECTRIX” and Switchcraft ® Panels are created
from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16”
(.062”) or 1/8” (.125”) thick. The standard panels clip in with two self-tapping
screws. Each panel is CNC machined to precisely mate with the designated con-
nectors and in the pocket mounting holes. Each Standard “CONNECTRIX” and
Switchcraft ® Panel is finished with oven cured semi-gloss black powder coat.
Most panels provide header space for custom engraving which is fast and
easily accomplished on a separate dedicated CNC engraving machine. The
finished panels show bright aluminum in the engraved characters and need
not be back filled. ACE standard panels are flat, strong, and rigid like the
typical thinner mild steel panels. Because the panels are machined and not
punched they stay flat and undistorted unlike punched panels which distort
in the punching process.
The machined “CONNECTRIX” style cutouts combine popular mount-
ing patterns of the Neutrik “D” series and Switchcraft “E” series con-
nectors with a generous rectangular cutout that mates with a growing
array of adapter-mounted standard connectors. The adapter mount is
plastic and provides ground isolation between the panel and connector.
Using the “CONNECTRIX” system panel it is possible to mount any com-
bination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks,
speaker jacks and numerous other standard connectors without a single
custom punch. This system provides for more connectors and mounting
options in stock standard ACE panels. The benefit is faster order turn
around and lower cost. Less custom fabrication for custom spec results
with off-the-shelf stock prices.
ORDERING OPTIONS
When ordering Stage Pockets please specify:
• 1) Stage Pocket Model Number
• 2) Stage Pocket Model Name
• 3) Stage Pocket Finish Type (Lid & Mounting Flange)
• 4) Optional Stage Pocket Panel Model Numbers
• 5) Optional Connectors to be loaded into Panels
• 6) Location of Connectors to be loaded into Panels
• 7) Type of Connector Mounts
PRICING
ACE BACKSTAGE CO., INC.’S Retail Price Guide may be downloaded as a
single Adobe PDF file (.pdf) or as a Microsoft Excel Spreadsheet file (.xls).
Ace’s Retail Price Guide may only be downloaded and viewed by qualified
contractors and dealers.
Note: Prices are U.S. suggested and provided as a guideline only. Actual
prices may vary from dealer to dealer and are subject to change without
notice. If you are a contractor or dealer and would like to receive Ace
Backstage Co., Inc.’s Confidential Dealer Price Guide call 661-295-5760 so
that we may begin the qualification process.
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1C.025BK/BR/CV
Model Numbers: #025xx (where xx= Finish Type | BK=Black, BR=Brass, CV=Copper Vein)
Model Name: Mini Stage Pocket - Small Capacity Standard general use Vertical Slant Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish with optional panel(s) and connectors
MINI STAGE POCKET “CONNECTRIX” SYSTEM PANEL CONFIGURATIONS
MINI STAGE POCKET MODEL NUMBERS
Model # Pocket Size Lid Type Finish
#025BK 025 = Mini Pocket SL = Standard Lid BK = Black
#025BR 025 = Mini Pocket SL = Standard Lid BR = Brass
#025CV 025 = Mini Pocket SL = Standard Lid CV = Copper Vein
MINI STAGE POCKET SWITCHCRAFT ® “E” MOUNT PANEL CONFIGURATIONS
Any Combination of the Following 2 Panel Series
Any combination of two (2) Panel Series #MP-100 or #MP-200
#MP-100 SERIES PANELS: Any 2 Panels in this series or
#MP-100 #MP-101 #MP-102 #MP-103 #MP-104 #MP-105*
#MP-106* #MP-107* #MP-108* #MP-109 #MP-110 #MP-111
#MP-112 #MP-113 #MP-114 #MP-115
#MP-200 SERIES PANELS: Any 2 Panels in this series or
#MP-201 #MP-202
MINI STAGE POCKET COMBINATION PANEL CONFIGURATIONS
ACCESSORIES
Model # Description
#025BBX Mini Pocket Back Box
#025BBX/AC Mini Pocket Back Box with A.C. Divider
#MP-100 MP-100 Series Panels mount up to 2 “Connectrix” connectors
#MP-200 MP-200 Series Panels mount up to 2 Switchcraft ® connectors
MINI STAGE POCKET LID & MOUNTING FLANGE OPTIONS
*NOTE: Connector capacity limitations apply depending on connectors used.