ACE BACKSTAGE Full Stage Pocket - Manual (Page 4)

FULL STAGE POCKET SPECIFICATIONS
8.5" x 8.5" CUTOUT IN STAGE
FLOOR WHEN MOUNTING IN
STAGE FLOOR WITHOUT
ACE #102BBX BACK BOX
CAPTIVE SLOT CLOSURE
DROPS INTO BOX WHEN
CABLE WAY SLOT IS IN USE
OPTIONAL BACK BOX WELDED 14 GAUGE
(.071" THICK) STEEL 10" X 6.5" X 6" ZINC
PLATED (ACE #102BBX BACK BOX) OR
OPTIONAL BACK ACCESS COVER 14 GAUGE
(.071" THICK) STEEL ZINC PLATED (ACE
#22BAC BACK ACCESS COVER - NOT SHOWN)
11 GAUGE (.120" THICK) STEEL TRIM BEZEL
AND LID ASSEMBLY WITH POWDER COAT
FINISH INSIDE AND OUTSIDE
• ANTIQUE COPPER VEIN
• ANTIQUE SILVER VEIN
• TEXTURED BLACK
• BRUSHED BRASS*
• STAINLESS STEEL*
*Solid Brass or Stainless Steel Metal
* Finish Available as Special Order
.375" CABLE WAY SLOT
10.500"
8.000"
10.500"
6.000"
4.500"
59/64"
NOM.
TOP VIEW
FRONT VIEW
4.500"
6.000"
8.250"
10.000"
NOMINAL
OPENING
"CONNECTRIX"
A FLEXIBLE CONNECTOR
AND PANEL SYSTEM
Choose Pre-fabricated audio,
communications, data, electric,
video, and voice connectors and
panels or create custom panels
as needed using the "Connectrix"
System of panels and connectors.
10.000"
SECTION VIEW
OPEN
BACK
ACCESS
8.000"
REMOVABLE HINGE PINS
PERMIT EASY LID
EXCHANGE FOR
CUSTOM LID
CONFIGURATIONS
TRIM BEZEL
.500"
.500"
.500"
.500"
16 GAUGE (.060" THICK)
WELDED STEEL POCKET
BODY CONSTRUCTION
1.500" NOMINAL
8.000"
7.187"
3.656"
1.875"
NOM.
ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com
4 of 4
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1B.122-222
Model Numbers: #122-xxyy, #222-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Full Stage Pocket - Large Capacity Standard general use Vertical Slant Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors