ADS-TEC VMT5015 (2010) User Manual
Page 14
Advertising
Terminals VMT5015
14
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Bracket for VESA standard
The stainless steel installation bracket for the VESA standard (75mm) has four drill holes.
Using this bracket, the device can be fitted to a wall or to a VESA coupler. You can set the
angle of the device towards the front or rear in several steps by loosening the self-locking
screws on both sides, in order to set up the angle of viewing.
Advertising