ADS-TEC VMT5017 (2010) - Manual (Page 26)

Terminals VMT5017
26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
6.4 E XTERNAL KEYBOARD
One mouse and one keyboard can be connected with both existing PS2 connectors. These
connections are colour coded for proper connection with this device.
The control system has a purple coloured 6-pin mini-DIN socket (PS2) identified as
“KEYB". Any commercially available AT-compatible quality keyboard equipped with the
required connector can be connected with this socket. Check the keyboard for proper
function before using it.
Note:
Since the timing of the integrated controller is optimised for Cherry keyboards, keyboards
of this manufacturer should preferably be used.
If the screen shows that the soft keyboard is active, controlling the device by using the
external keyboard is possible with restrictions only.
The keyboard must be connected before switching the device on, since the keyboard
interface is initialised while booting! If the keyboard is connected during operation of this
device, and the keyboard was not connected during the booting process, it is not
operable.
Pos: 28 /Datentechnik/Schnittstellen/Maus/Maus für OPC / IPC 51/53/55 / 1100/ 2400 / CPC / PLC /OTC / ITC / VMT-Serie @ 0\mod_1158910619667_681.doc @ 821 @
6.5 M OUSE
The green coloured interface "MOUSE" is used to connect a mouse. Check the mouse for
compatibility before using it.
PIN NUMBER SIGNAL NAME
1 Data
2 NC
3 GND
4 +5V
5 Clock
6 NC
Note:
The mouse must be connected before switching the device on, since the mouse interface
is initialised while booting! If the mouse is connected during operation of this device, and
the mouse was not connected during the booting process, it is not operable.
Pos: 29 /Datentechnik/Schnittstellen/Spannungsversorgung/Spannungsversorgung für VMT50xx-Serie @ 0\mod_1158918964340_681.doc @ 863 @
PIN NUMBER SIGNAL NAME
1 Data
2 NC
3 GND
4 +5V
5 Clock
6 NC