AIM Sports Fiber Optic Tri-Illuminated Scopes - Manual (Page 17)

17 14
ADJUSTING WINDAGE
1. Unscrew the cap covering the windage knob. (Fig 3)
2. Turn the knob clockwise to the right (noted on the knob face with an L
and an arrow pointing to the right) to move the windage/point of impact
to the left.(Fig 4)
3. Turn the knob counter clockwise to the left to move the windage/point of
impact to the right.
4. Replace the cap to protect the knob from being moved out of alignment.
Figure 3 Figure 4
ILLUMINATING THE RETICLE
All AIM Illuminated Reticle scopes may be used in either the standard or
the illuminated state. When not illuminated, the reticle performs the same
as the reticle in a standard AIM scope. Illuminating the reticle allows a
better distinction to be made in poorly lighted conditions between the target
and the precise position of the aiming point.
The control dial for the AIM Illuminated Reticle is
located on the top of scope