Bipods, Bpunis instructions, Bpak instructions – AIM Sports Bipods User Manual

Page 2: Bpsksl & bpskss instructions, Bpars & bparss instructions, Features, Specifications

Advertising
background image

BPARS & BPARSS

AR Handguard Rail Bipod

(standard & short)

CAUTION

Always check and be certain that the firearm is unloaded

before undertaking any work upon it

.

BPUNIS INSTRUCTIONS

1. Remove the four hex screws from top of bipod.
2. Set aside the four screws and top piece of clamp.
3. Place concave portion of clamp on underside of barrel.
4. Replace top half of clamp and tighten all four hex screws, do NOT
over tighten screws.
5. To extend legs, press down on latch and pull towards you. Squeeze
legs together to fold for storage.

BPAK INSTRUCTIONS

1. Squeeze legs of bipod together to open clamp.
2. With clamp open place on barrel.
3. Gently open legs to close clamp around barrel.
4. To extend legs, press down on latch and pull towards you.
5. To store, squeeze legs together and pivot locking band into place.

BPSKSL & BPSKSS INSTRUCTIONS

1. First remove the bayonet or any accessories that might block the lug.
2. Remove the hex screw and both nuts from top of bipod.
3. Place square tab of the bipod inside of bayonet lug.
4. Place screw through hole in lug and tighten using first nut, once screw is
tight place second nut on screw and hand tighten, do NOT over tighten.
5. To extend legs, press down on latch and pull towards you. Squeeze legs
together to fold for storage.

BPARS & BPARSS INSTRUCTIONS

1. Turn large screw on the underside of the mount until it is flush with
mount (do NOT remove screw).
2. Slide mount onto rail and tighten screw, hand tighten only. Do NOT
over tighten screws.

BIPODS

FEATURES

• Adjustable legs with retract/collapse button
• Matte black aircraft grade aluminum
• Fits most barrels, clamps directly to barrel (BPUNIS only)
• Clamps directly to AK/SKS barrel (BPAK only)
• Clamps directly to bayonet lug (BPSKSL & BPSKSS only)
• Compatible with Weaver/Picatinny 1913 Rails (BPARS & BPARSS only)
• Clamps directly to handguard rail (BPARS & BPARSS only)

SPECIFICATIONS

HEIGHT
WEIGHT

BPAK

AK/SKS Bipod

BPUNIS

Universal Bipod

BPSKSL & BPSKSS

SKS Bipod Mount

(long & short)

BPUNIS

8.5”-13.5”

15 oz.

BPAK

8.5”-13.5”

15.5 oz.

BSKSL

9.5”-13.8”

12.5 oz.

BPSKSS
8.3”-11.5”

8.9 oz.

BPARS

6.8”-9.4”

16 oz.

BPARSS

6.5”-9”
9.2 oz.

Advertising