AIM Sports Cartridge Laser Bore Sighters - Manual (Page 2)

INSTALLING BORE SIGHTER
1. Remove cap from back of bore sight.
2. Insert batterie(s) with positive side up.
3. Replace cap, hand tighten only.
4. Place in chamber and gently close bolt.
REMOVAL / STORAGE
1. Open bolt to eject bore sighter.
2. Remove cap from back of bore sight and set batteries aside
until next use.
SPECIFICATIONS
“This Laser Product is designated as Class 3R during all procedures of operation”.
“Laser Light-Avoid Direct Eye Exposure”.
POWER OUTPUT <5mW
WAVELENGTH 635-655nm
BATTERY *CR44
**LR41
***LR626
Match asterisks to product list for battery type
CARTRIDGE LASER BORE SIGHTERS
AIM SPORTS INC.
1321 E. CHIEF PRIVADO
ONTARIO, CA 91761
PROD #: XXXXX
LOT #: AIM13-XXXXX
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
PJBS12G* 12 Gauge
PJBS20G* 20 Gauge
PJBS50B* 50 Gauge
PJBS303BR** .303R British
PJBS3006** .30-06/.25-06/270
PJBS7MM** 7 MM Mauser
PJBS8MM** 8 MM Mauser
PJBS223** .223 Remington
PJBS308** .243/.308 Win/7 MM-08 Rem
PJBS300W** .300 Winchester Magnum
PJBS3030W** .30-30 Winchester
PJBS762/39** 7.62X39 MM
PJBS762/54** 7.62X54R MM
PJBS9MM*** 9 MM Pistol
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
635-655nm <5mW CW
EN/IEC 60825-1 2007
COMPLIES WITH FDA
PERFORMANCE
STANDARDS FOR
LASER PRODUCTS
EXCEPT FOR
DEVIATIONS
PURSUANT TO LASER
NOTICE NO. 50, DATED
JUNE 24, 2007