AiM MXL2 - Manual (Page 14)

RACESTUDIO3 SOFTWARE
26 27
MXL2
10.2 Connect Your MXL2 to a PC
When you connect your MXL2 to the PC, it
is automatically recognized, and on the left
side of the PC display the name of your
device appears, as shown in the picture.
At this point, you can execute the following
functions:
n Transmit the configuration
n On Line view
n Calibration
n Data download
This is explained in the next paragraphs.
10.2.1 Configuration Transmission
When you connect an MXL2 to your PC, the
“TRANSMIT” pushbutton appears at the
top of the configuration page.
Simply push it and the configuration will be
transmitted.
CHAPTER 10
10.1.5 Modify or Delete an Existing
Configuration
For modifying an existing
configuration, select the desired configuration
to be modified and double click on it.
To delete an existing configuration, click on
it and select delete.
Then, proceed like in the creation of the
configuration.